Dvd Copying-ripping Definitions

Dvd Copying/ripping Definitions

Rip
To take off the audio or video from a CD or DVD. Often CD Audio is "ripped" to MP3 files or DVD video ripped to VOB files.

Compression
The process of removing redundancies in digital data to reduce the amount that must be stored or transmitted. Lossless compression removes only enough redundancy so that the original data can be recreated exactly as it was. Lossy compression sacrifices additional data to achieve greater compression.

Encoding
Encoding is the process of changing data from one form into another according to a set of rules specifiec by a codec. The data is usually a file containing audio, video or still image. Often the encoding is done to make a file compatible with specific hardware (such as a DVD Player) or to compress or reduce the space the data occupies.

Common video encoding methods are DivX, MPEG-1, MPEG-2 and MPEG-4. A common audio encoding method is MP3 although many others exist including MPEG1 audio, DTS, and Dolby Digital.

Transcoding
On this site generally another name for encoding.

A more technical term would be "The reformatting of content, without changing the source, to another type of content - most often of a different format than the original (but does not have to be)"

Dvd-9 to Dvd+r Dl, Double Layer To Double Layer, 1-1 copies

Dvd-9 -> Dvd+r Dl, Double Layer To Double Layer!, 1:1 copies

Remove all discs from drives.

Open DVD Decrypter.

From the 'Mode' menu, select 'ISO' -> 'Read'.

Put DVD-9 disc (That's the film if you didn't guess) in drive.

Take note of the 'Destination' file name.

Click the big 'Decrypt' button.

Wait for it to read and write the image to your hard drive.

Take the DVD-9 disc (yep.. take the original film out) out of the drive.

From the 'Mode' menu, select 'ISO' -> 'Write'.

Put a blank double layer disc in your DVD Writer.

Click the little folder icon - 'Browse for source file' - and select the MDS file created for you as part of the steps above.

Click the big 'Write' button.

Finished!

Estimated time to read and burn 45 minutes. All copy protection is removed from the backup, and as you are writing to a dual layered disc there is no quality loss!!!

This process can be used to backup DVD5 disc's 1:1 and PS2 disc's.

Dual Boot After The Fact

I want to run both Windows 2000 Pro and Windows 98 SE on my computer. When I bought a new hard drive, I installed Windows 2000 on it first. But my subsequent research seems to indicate that I should have installed Windows 98 SE first and then Windows 2000 on a separate partition. How do I remove Windows 2000 from the drive so I can partition it and then install Windows 98 SE first and reinstall Windows 2000?



You don't have to remove Windows 2000. Start by installing Windows 98 SE in a different partition. When you're done, insert the Windows 2000 CD and reboot to start Windows 2000 setup. On the Welcome to Setup page, press R (for Repair). When you reach the Windows 2000 Repair Options page, press R again.

You'll then be prompted to select a repair option. Press M for Manual. Then press the Up Arrow until Verify Windows 2000 system files is highlighted; press Enter to clear this selection. Press the Down Arrow to select Continue (perform selected tasks), and then press Enter.

The system will ask whether you have an emergency repair disk. Press L, indicating it should Locate your existing installation. Once it does so, press Enter to complete the repairs. This will establish dual boot for you. (This procedure also works for Windows XP.)


*NOTE:

Don't know if this will also work for Linux. If anyone does try it, please let me know.